GetFreeCarCheck

2010 Mazda 5 · 5,082 MOT tests

2010 Mazda 5 reliability

2010 Mazda 5s fail 50% of first MOT tests, 26% more MOT fails than the average car its age and mileage, ranking 9 of 10 5 years (5,082 DVSA tests, 2022 to 2024).

Well below average#9 of 10 years

Looking at a 2010 Mazda 5?

See its own MOT history and mileage, free.

first-time fail rate (all Mazda 5s: 48.2%)
50%
first-time fail rate (all Mazda 5s: 48.2%)
fails than cars of the same age and mileage
26% more
fails than cars of the same age and mileage
typical miles at its MOT, aged about 13
96,363
typical miles at its MOT, aged about 13
MOT tests, 2022 to 2024
5,082
MOT tests, 2022 to 2024

Year on year

2010 against the years either side

  • 2009 cars: 24% more MOT fails than the average car its age (the 2010 car does worse)
  • 2011 cars: 11% more MOT fails than the average car its age (the 2010 car does worse)
  • Weak spot: exhaust, emissions and leaks, 12.5% of tests fail here (162% above cars of the same age and mileage).
  • Strong point: steering, 36% fewer fails than comparable cars.
  • Plates: a 2010 car carries a 59 plate (January–February 2010), or a 10 plate (March–August 2010), or a 60 plate (September–December 2010).

Common problems

What fails on a 2010 Mazda 5

Fail rate by area

  • Suspension24.7%
  • Lights and electrics22.8%
  • Exhaust, emissions and leaks12.5%
  • Body, chassis and structure11.2%
  • Brakes10.4%
  • Tyres10.3%
  • Windscreen, wipers and mirrors6.5%

Average for cars of the same age and mileage

Top failures

  1. Position lamp not working 7.83%

    A failed position lamp makes the car harder to see in poor light and is illegal, so it must be repaired.

  2. Suspension ball joint excessively worn 6.87%

    A worn ball joint can fail and cause loss of steering control, so it must be replaced promptly.

  3. Lambda reading outside specified limits 4.68%

    An out-of-range lambda reading suggests poor fuel mixture or a failing catalytic converter, so diagnosis is needed.

  4. CV joint boot split or insecure 4.53%

    A split CV boot lets dirt in and grease out, so the joint wears and may need full replacement.

  5. Exhaust has major gas leak 4.49%

    A major exhaust leak can let poisonous gas into the car and is illegal, so it must be repaired before driving.

  6. Dipped beam headlamp not working 4.45%

    A failed dipped beam makes it hard to see and be seen at night, so the lamp needs fixing before driving.

Common advisories

Tyre worn close to legal limit (19.36%) · Brake disc pitted or scored (13.03%) · Suspension arm pin/bush showing wear (11.47%) · Brake pads wearing thin (10.51%) · Sub-frame showing corrosion (9.35%) · Linkage ball joint slight play (9.35%)

Other years

Every Mazda 5 year

The full picture: Mazda 5 reliability. Before you pay for any Mazda 5, a Full Check (£9.99) shows finance, stolen and write-off records the MOT can't.

Source: DVSA anonymised MOT results, 2022 to 2024, class 4 normal tests.

Is a 2010 Mazda 5 reliable?

2010 Mazda 5s fail 50% of first MOT tests, 26% more MOT fails than the average car its age and mileage, ranking 9 of 10 5 years (5,082 DVSA tests, 2022 to 2024).

What fails on a 2010 Mazda 5 MOT?

Most often position lamp not working (7.83% of tests), suspension ball joint excessively worn (6.87% of tests), lambda reading outside specified limits (4.68% of tests).

How many miles should a 2010 Mazda 5 have done?

At its MOT aged about 13, a typical 2010 Mazda 5 shows 96,363 miles. Much higher or lower is worth asking about.

What plate is a 2010 car?

A car first registered in 2010 carries a 59 plate (January–February 2010), or a 10 plate (March–August 2010), or a 60 plate (September–December 2010).

Check a 2010 Mazda 5 free

MOT history, mileage record, ULEZ, tax and recalls on any UK car, in seconds. No sign-up, no card.