GetFreeCarCheck

2016 Nissan Pulsar · 20,725 MOT tests

2016 Nissan Pulsar reliability

2016 Nissan Pulsars fail 22.8% of first MOT tests, 15% more MOT fails than the average car its age and mileage, ranking 3 of 5 Pulsar years (20,725 DVSA tests, 2022 to 2024).

Below average#3 of 5 years

Looking at a 2016 Nissan Pulsar?

See its own MOT history and mileage, free.

first-time fail rate (all Nissan Pulsars: 23.9%)
22.8%
first-time fail rate (all Nissan Pulsars: 23.9%)
fails than cars of the same age and mileage
15% more
fails than cars of the same age and mileage
typical miles at its MOT, aged about 7
48,125
typical miles at its MOT, aged about 7
MOT tests, 2022 to 2024
20,725
MOT tests, 2022 to 2024

Year on year

2016 against the years either side

  • 2015 cars: 27% more MOT fails than the average car its age (the 2016 car does better)
  • 2017 cars: 5% more MOT fails than the average car its age (the 2016 car does worse)
  • Weak spot: steering, 2.3% of tests fail here (197% above cars of the same age and mileage).
  • Strong point: windscreen, wipers and mirrors, 45% fewer fails than comparable cars.
  • Plates: a 2016 car carries a 65 plate (January–February 2016), or a 16 plate (March–August 2016), or a 66 plate (September–December 2016).

Common problems

What fails on a 2016 Nissan Pulsar

Fail rate by area

  • Suspension7.6%
  • Tyres6.4%
  • Brakes5.9%
  • Lights and electrics4.9%
  • Steering2.3%
  • Windscreen, wipers and mirrors1.9%
  • Exhaust, emissions and leaks1.5%

Average for cars of the same age and mileage

Top failures

  1. Suspension ball joint excessively worn 3.29%

    A worn ball joint can fail and cause loss of steering control, so it must be replaced promptly.

  2. Tyre tread below 1.6mm 2.72%

    Tread below 1.6mm is illegal and reduces grip in wet conditions, so the tyre must be replaced.

  3. Brake pads worn below 1.5mm 2.71%

    Pads worn below 1.5mm lose stopping power and can damage discs, so replacement is needed before the car is driven.

  4. Coil spring fractured or broken 2.32%

    A broken coil spring can leave the car sitting low or unstable, so it must be replaced before driving.

  5. Track rod end ball joint excessively worn 1.75%

    Worn steering ball joints can affect steering control and safety, so repair is needed before the car is driven.

  6. Position lamp not working 1.13%

    A failed position lamp makes the car harder to see in poor light and is illegal, so it must be repaired.

Common advisories

Tyre worn close to legal limit (15.11%) · Brake pads wearing thin (12.28%) · Tyre slightly damaged or cracking (6.44%) · Brake disc pitted or scored (6.24%) · Suspension arm pin/bush showing wear (4.89%) · Child seat limits belt inspection (2.91%)

Other years

Every Nissan Pulsar year

The full picture: Nissan Pulsar reliability. Before you pay for any Nissan Pulsar, a Full Check (£9.99) shows finance, stolen and write-off records the MOT can't.

Source: DVSA anonymised MOT results, 2022 to 2024, class 4 normal tests.

Is a 2016 Nissan Pulsar reliable?

2016 Nissan Pulsars fail 22.8% of first MOT tests, 15% more MOT fails than the average car its age and mileage, ranking 3 of 5 Pulsar years (20,725 DVSA tests, 2022 to 2024).

What fails on a 2016 Nissan Pulsar MOT?

Most often suspension ball joint excessively worn (3.29% of tests), tyre tread below 1.6mm (2.72% of tests), brake pads worn below 1.5mm (2.71% of tests).

How many miles should a 2016 Nissan Pulsar have done?

At its MOT aged about 7, a typical 2016 Nissan Pulsar shows 48,125 miles. Much higher or lower is worth asking about.

What plate is a 2016 car?

A car first registered in 2016 carries a 65 plate (January–February 2016), or a 16 plate (March–August 2016), or a 66 plate (September–December 2016).

Check a 2016 Nissan Pulsar free

MOT history, mileage record, ULEZ, tax and recalls on any UK car, in seconds. No sign-up, no card.