GetFreeCarCheck

2010 Hyundai Santa Fe · 11,338 MOT tests

2010 Hyundai Santa Fe reliability

2010 Hyundai Santa Fes fail 45.3% of first MOT tests, 12% more MOT fails than the average car its age and mileage, ranking 15 of 18 Santa Fe years (11,338 DVSA tests, 2022 to 2024).

Below average#15 of 18 years

Looking at a 2010 Hyundai Santa Fe?

See its own MOT history and mileage, free.

first-time fail rate (all Hyundai Santa Fes: 32.5%)
45.3%
first-time fail rate (all Hyundai Santa Fes: 32.5%)
fails than cars of the same age and mileage
12% more
fails than cars of the same age and mileage
typical miles at its MOT, aged about 13
110,693
typical miles at its MOT, aged about 13
MOT tests, 2022 to 2024
11,338
MOT tests, 2022 to 2024

Year on year

2010 against the years either side

  • 2009 cars: about average for its age (the 2010 car does worse)
  • 2011 cars: 19% more MOT fails than the average car its age (the 2010 car does better)
  • Weak spot: body, chassis and structure, 10.3% of tests fail here (79% above cars of the same age and mileage).
  • Strong point: steering, 52% fewer fails than comparable cars.
  • Plates: a 2010 car carries a 59 plate (January–February 2010), or a 10 plate (March–August 2010), or a 60 plate (September–December 2010).

Common problems

What fails on a 2010 Hyundai Santa Fe

Fail rate by area

  • Lights and electrics23.9%
  • Suspension19.6%
  • Brakes14.2%
  • Body, chassis and structure10.3%
  • Tyres7%
  • Windscreen, wipers and mirrors5.8%
  • Steering1.6%

Average for cars of the same age and mileage

Top failures

  1. Position lamp not working 8.95%

    A failed position lamp makes the car harder to see in poor light and is illegal, so it must be repaired.

  2. CV joint boot split or insecure 7.66%

    A split CV boot lets dirt in and grease out, so the joint wears and may need full replacement.

  3. Suspension ball joint excessively worn 7%

    A worn ball joint can fail and cause loss of steering control, so it must be replaced promptly.

  4. Stop lamp not working 4.22%

    A failed stop lamp means drivers behind cannot see when you brake, a safety risk that must be fixed.

  5. Tyre tread below 1.6mm 3.32%

    Tread below 1.6mm is illegal and reduces grip in wet conditions, so the tyre must be replaced.

  6. Coil spring fractured or broken 3.09%

    A broken coil spring can leave the car sitting low or unstable, so it must be replaced before driving.

Common advisories

Tyre worn close to legal limit (17.96%) · Brake pipes corroded and greasy (12.08%) · Suspension arm pin/bush showing wear (10.35%) · Coil spring showing some corrosion (10.09%) · Brake pads wearing thin (9.98%) · Brake disc pitted or scored (9.65%)

Other years

Every Hyundai Santa Fe year

The full picture: Hyundai Santa Fe reliability. Before you pay for any Hyundai Santa Fe, a Full Check (£9.99) shows finance, stolen and write-off records the MOT can't.

Source: DVSA anonymised MOT results, 2022 to 2024, class 4 normal tests.

Is a 2010 Hyundai Santa Fe reliable?

2010 Hyundai Santa Fes fail 45.3% of first MOT tests, 12% more MOT fails than the average car its age and mileage, ranking 15 of 18 Santa Fe years (11,338 DVSA tests, 2022 to 2024).

What fails on a 2010 Hyundai Santa Fe MOT?

Most often position lamp not working (8.95% of tests), cv joint boot split or insecure (7.66% of tests), suspension ball joint excessively worn (7% of tests).

How many miles should a 2010 Hyundai Santa Fe have done?

At its MOT aged about 13, a typical 2010 Hyundai Santa Fe shows 110,693 miles. Much higher or lower is worth asking about.

What plate is a 2010 car?

A car first registered in 2010 carries a 59 plate (January–February 2010), or a 10 plate (March–August 2010), or a 60 plate (September–December 2010).

Check a 2010 Hyundai Santa Fe free

MOT history, mileage record, ULEZ, tax and recalls on any UK car, in seconds. No sign-up, no card.