GetFreeCarCheck

2010 Hyundai i800 · 1,560 MOT tests

2010 Hyundai i800 reliability

2010 Hyundai i800s fail 46.1% of first MOT tests, 15% more MOT fails than the average car its age and mileage, ranking 2 of 7 i800 years (1,560 DVSA tests, 2022 to 2024).

Below average#2 of 7 years

Looking at a 2010 Hyundai i800?

See its own MOT history and mileage, free.

first-time fail rate (all Hyundai i800s: 37%)
46.1%
first-time fail rate (all Hyundai i800s: 37%)
fails than cars of the same age and mileage
15% more
fails than cars of the same age and mileage
typical miles at its MOT, aged about 12
104,407
typical miles at its MOT, aged about 12
MOT tests, 2022 to 2024
1,560
MOT tests, 2022 to 2024

Year on year

2010 against the years either side

  • 2009 cars: 17% more MOT fails than the average car its age (the 2010 car does better)
  • 2011 cars: 10% more MOT fails than the average car its age (the 2010 car does worse)
  • Weak spot: brakes, 22.9% of tests fail here (130% above cars of the same age and mileage).
  • Strong point: exhaust, emissions and leaks, 59% fewer fails than comparable cars.
  • Plates: a 2010 car carries a 59 plate (January–February 2010), or a 10 plate (March–August 2010), or a 60 plate (September–December 2010).

Common problems

What fails on a 2010 Hyundai i800

Fail rate by area

  • Brakes22.9%
  • Lights and electrics21.4%
  • Suspension13.5%
  • Windscreen, wipers and mirrors6.3%
  • Tyres6%
  • Steering5.1%
  • Body, chassis and structure2.6%

Average for cars of the same age and mileage

Top failures

  1. Position lamp not working 7.63%

    A failed position lamp makes the car harder to see in poor light and is illegal, so it must be repaired.

  2. Parking brake efficiency below minimum 7.31%

    The parking brake holds the car less well than required, so it may roll on a slope and needs repair.

  3. Parking brake inoperative on one side 5.96%

    The parking brake does not work on one side, so the car may not hold on a slope and needs repair.

  4. Suspension ball joint excessively worn 5.96%

    A worn ball joint can fail and cause loss of steering control, so it must be replaced promptly.

  5. Service brake excessively binding 5%

    A brake that drags when released can overheat, wear quickly and waste fuel, so it needs prompt inspection.

  6. Brake pads worn below 1.5mm 3.46%

    Pads worn below 1.5mm lose stopping power and can damage discs, so replacement is needed before the car is driven.

Common advisories

Tyre worn close to legal limit (16.28%) · Brake pipes corroded and greasy (13.21%) · Engine oil leak, not excessive (12.88%) · Brake disc pitted or scored (12.44%) · Brake pads wearing thin (8.4%) · Coil spring showing some corrosion (8.01%)

Other years

Every Hyundai i800 year

The full picture: Hyundai i800 reliability. Before you pay for any Hyundai i800, a Full Check (£9.99) shows finance, stolen and write-off records the MOT can't.

Source: DVSA anonymised MOT results, 2022 to 2024, class 4 normal tests.

Is a 2010 Hyundai i800 reliable?

2010 Hyundai i800s fail 46.1% of first MOT tests, 15% more MOT fails than the average car its age and mileage, ranking 2 of 7 i800 years (1,560 DVSA tests, 2022 to 2024).

What fails on a 2010 Hyundai i800 MOT?

Most often position lamp not working (7.63% of tests), parking brake efficiency below minimum (7.31% of tests), parking brake inoperative on one side (5.96% of tests).

How many miles should a 2010 Hyundai i800 have done?

At its MOT aged about 12, a typical 2010 Hyundai i800 shows 104,407 miles. Much higher or lower is worth asking about.

What plate is a 2010 car?

A car first registered in 2010 carries a 59 plate (January–February 2010), or a 10 plate (March–August 2010), or a 60 plate (September–December 2010).

Check a 2010 Hyundai i800 free

MOT history, mileage record, ULEZ, tax and recalls on any UK car, in seconds. No sign-up, no card.