GetFreeCarCheck

2006 Ford Ka · 13,116 MOT tests

2006 Ford Ka reliability

2006 Ford Kas fail 51.6% of first MOT tests, 52% more MOT fails than the average car its age and mileage, ranking 17 of 19 Ka years (13,116 DVSA tests, 2022 to 2024).

Well below average#17 of 19 years

Looking at a 2006 Ford Ka?

See its own MOT history and mileage, free.

first-time fail rate (all Ford Kas: 32.8%)
51.6%
first-time fail rate (all Ford Kas: 32.8%)
fails than cars of the same age and mileage
52% more
fails than cars of the same age and mileage
typical miles at its MOT, aged about 16
52,870
typical miles at its MOT, aged about 16
MOT tests, 2022 to 2024
13,116
MOT tests, 2022 to 2024

Year on year

2006 against the years either side

  • 2005 cars: 49% more MOT fails than the average car its age (the 2006 car does worse)
  • 2007 cars: 54% more MOT fails than the average car its age (the 2006 car does better)
  • Weak spot: seat belts and airbags, 6.5% of tests fail here (336% above cars of the same age and mileage).
  • Strong point: steering, 39% fewer fails than comparable cars.
  • Plates: a 2006 car carries a 55 plate (January–February 2006), or a 06 plate (March–August 2006), or a 56 plate (September–December 2006).

Common problems

What fails on a 2006 Ford Ka

Fail rate by area

  • Suspension31.2%
  • Lights and electrics20.4%
  • Body, chassis and structure11.2%
  • Windscreen, wipers and mirrors10%
  • Tyres8.6%
  • Brakes7.2%
  • Seat belts and airbags6.5%

Average for cars of the same age and mileage

Top failures

  1. Suspension mounting area seriously corroded 13.11%

    Corrosion near suspension mountings can seriously weaken the body structure, so an expert inspection is needed.

  2. Coil spring fractured or broken 6.81%

    A broken coil spring can leave the car sitting low or unstable, so it must be replaced before driving.

  3. Suspension arm pin/bush excessively worn 6.02%

    Worn suspension arm bushes allow the wheel to move unpredictably, affecting steering, handling and tyre wear.

  4. Seat belt anchor area weakened 5.54%

    Corrosion near a seat belt anchor can weaken the body and make the belt fail, so expert repair is needed.

  5. Position lamp not working 4.53%

    A failed position lamp makes the car harder to see in poor light and is illegal, so it must be repaired.

  6. Stop lamp not working 4.32%

    A failed stop lamp means drivers behind cannot see when you brake, a safety risk that must be fixed.

Common advisories

Suspension arm pin/bush showing wear (17.51%) · Tyre worn close to legal limit (13.43%) · Engine oil leak, not excessive (13.33%) · Tyre slightly damaged or cracking (12.48%) · Suspension mounting area showing corrosion (12.28%) · Brake disc pitted or scored (8.36%)

Other years

Every Ford Ka year

The full picture: Ford Ka reliability. Before you pay for any Ford Ka, a Full Check (£9.99) shows finance, stolen and write-off records the MOT can't.

Source: DVSA anonymised MOT results, 2022 to 2024, class 4 normal tests.

Is a 2006 Ford Ka reliable?

2006 Ford Kas fail 51.6% of first MOT tests, 52% more MOT fails than the average car its age and mileage, ranking 17 of 19 Ka years (13,116 DVSA tests, 2022 to 2024).

What fails on a 2006 Ford Ka MOT?

Most often suspension mounting area seriously corroded (13.11% of tests), coil spring fractured or broken (6.81% of tests), suspension arm pin/bush excessively worn (6.02% of tests).

How many miles should a 2006 Ford Ka have done?

At its MOT aged about 16, a typical 2006 Ford Ka shows 52,870 miles. Much higher or lower is worth asking about.

What plate is a 2006 car?

A car first registered in 2006 carries a 55 plate (January–February 2006), or a 06 plate (March–August 2006), or a 56 plate (September–December 2006).

Check a 2006 Ford Ka free

MOT history, mileage record, ULEZ, tax and recalls on any UK car, in seconds. No sign-up, no card.