GetFreeCarCheck

2012 Ford Fusion · 2,355 MOT tests

2012 Ford Fusion reliability

2012 Ford Fusions fail 27.6% of first MOT tests, about average for its age and mileage, ranking 2 of 11 Fusion years (2,355 DVSA tests, 2022 to 2024).

About average#2 of 11 years

Looking at a 2012 Ford Fusion?

See its own MOT history and mileage, free.

first-time fail rate (all Ford Fusions: 40.6%)
27.6%
first-time fail rate (all Ford Fusions: 40.6%)
fails than cars of the same age and mileage
2% fewer
fails than cars of the same age and mileage
typical miles at its MOT, aged about 11
54,030
typical miles at its MOT, aged about 11
MOT tests, 2022 to 2024
2,355
MOT tests, 2022 to 2024

Year on year

2012 against the years either side

  • 2011 cars: 6% fewer MOT fails than the average car its age (the 2012 car does worse)
  • Weak spot: lights and electrics, 15.5% of tests fail here (47% above cars of the same age and mileage).
  • Strong point: exhaust, emissions and leaks, 57% fewer fails than comparable cars.
  • Plates: a 2012 car carries a 61 plate (January–February 2012), or a 12 plate (March–August 2012), or a 62 plate (September–December 2012).

Common problems

What fails on a 2012 Ford Fusion

Fail rate by area

  • Lights and electrics15.5%
  • Brakes6%
  • Suspension4.6%
  • Windscreen, wipers and mirrors4.2%
  • Tyres3.7%
  • Body, chassis and structure2%
  • Exhaust, emissions and leaks1%

Average for cars of the same age and mileage

Top failures

  1. Stop lamp not working 3.91%

    A failed stop lamp means drivers behind cannot see when you brake, a safety risk that must be fixed.

  2. Rear fog lamp not working 3.14%

    A failed rear fog lamp reduces visibility in fog and leaves you less visible to following traffic, so repair it.

  3. Direction indicator wrong colour 2.93%

    An indicator showing the wrong colour may confuse other drivers, so the lens or bulb should be replaced.

  4. Wiper blade not clearing windscreen 2.89%

    Wipers that do not clear the windscreen reduce visibility in rain, which is a safety risk, so replace them.

  5. Dipped beam headlamp not working 1.91%

    A failed dipped beam makes it hard to see and be seen at night, so the lamp needs fixing before driving.

  6. Rigid brake pipe excessively corroded 1.91%

    Badly corroded brake pipes can leak or fail, which can cause a loss of braking, so repair is urgent.

Common advisories

Tyre slightly damaged or cracking (11.25%) · Tyre worn close to legal limit (10.02%) · Brake pipes corroded and greasy (7.81%) · Brake disc pitted or scored (7.05%) · Indicator lens slightly discoloured (5.05%) · Brake pads wearing thin (3.48%)

Other years

Every Ford Fusion year

The full picture: Ford Fusion reliability. Before you pay for any Ford Fusion, a Full Check (£9.99) shows finance, stolen and write-off records the MOT can't.

Source: DVSA anonymised MOT results, 2022 to 2024, class 4 normal tests.

Is a 2012 Ford Fusion reliable?

2012 Ford Fusions fail 27.6% of first MOT tests, about average for its age and mileage, ranking 2 of 11 Fusion years (2,355 DVSA tests, 2022 to 2024).

What fails on a 2012 Ford Fusion MOT?

Most often stop lamp not working (3.91% of tests), rear fog lamp not working (3.14% of tests), direction indicator wrong colour (2.93% of tests).

How many miles should a 2012 Ford Fusion have done?

At its MOT aged about 11, a typical 2012 Ford Fusion shows 54,030 miles. Much higher or lower is worth asking about.

What plate is a 2012 car?

A car first registered in 2012 carries a 61 plate (January–February 2012), or a 12 plate (March–August 2012), or a 62 plate (September–December 2012).

Check a 2012 Ford Fusion free

MOT history, mileage record, ULEZ, tax and recalls on any UK car, in seconds. No sign-up, no card.