GetFreeCarCheck

2010 Fiat 500 · 69,695 MOT tests

2010 Fiat 500 reliability

2010 Fiat 500s fail 41.3% of first MOT tests, 16% more MOT fails than the average car its age and mileage, ranking 5 of 14 500 years (69,695 DVSA tests, 2022 to 2024).

Below average#5 of 14 years

Looking at a 2010 Fiat 500?

See its own MOT history and mileage, free.

first-time fail rate (all Fiat 500s: 31%)
41.3%
first-time fail rate (all Fiat 500s: 31%)
fails than cars of the same age and mileage
16% more
fails than cars of the same age and mileage
typical miles at its MOT, aged about 13
72,076
typical miles at its MOT, aged about 13
MOT tests, 2022 to 2024
69,695
MOT tests, 2022 to 2024

Year on year

2010 against the years either side

  • 2009 cars: 16% more MOT fails than the average car its age (the 2010 car does worse)
  • 2011 cars: 20% more MOT fails than the average car its age (the 2010 car does better)
  • Weak spot: brakes, 12.8% of tests fail here (55% above cars of the same age and mileage).
  • Plates: a 2010 car carries a 59 plate (January–February 2010), or a 10 plate (March–August 2010), or a 60 plate (September–December 2010).

Common problems

What fails on a 2010 Fiat 500

Fail rate by area

  • Suspension18.2%
  • Lights and electrics17.7%
  • Brakes12.8%
  • Tyres7.2%
  • Windscreen, wipers and mirrors6%
  • Body, chassis and structure5.9%
  • Exhaust, emissions and leaks4.3%

Average for cars of the same age and mileage

Top failures

  1. Suspension arm pin/bush excessively worn 4.23%

    Worn suspension arm bushes allow the wheel to move unpredictably, affecting steering, handling and tyre wear.

  2. Parking brake efficiency below minimum 4.16%

    The parking brake holds the car less well than required, so it may roll on a slope and needs repair.

  3. Shock absorber serious fluid leak 3.34%

    A shock absorber leaking heavily has likely lost its damping, so the car will handle and brake less safely.

  4. Shock absorber bush excessively worn 3.28%

    Worn shock absorber bushes cause knocking and poor ride control, and they tend to worsen, so they need replacing.

  5. Suspension ball joint excessively worn 3.01%

    A worn ball joint can fail and cause loss of steering control, so it must be replaced promptly.

  6. Stop lamp not working 2.87%

    A failed stop lamp means drivers behind cannot see when you brake, a safety risk that must be fixed.

Common advisories

Tyre worn close to legal limit (15.46%) · Coil spring showing some corrosion (12.98%) · Tyre slightly damaged or cracking (10.53%) · Exhaust has minor gas leak (9.81%) · Brake disc pitted or scored (7.08%) · Shock absorber light oil misting (6.53%)

Other years

Every Fiat 500 year

The full picture: Fiat 500 reliability. Before you pay for any Fiat 500, a Full Check (£9.99) shows finance, stolen and write-off records the MOT can't.

Source: DVSA anonymised MOT results, 2022 to 2024, class 4 normal tests.

Is a 2010 Fiat 500 reliable?

2010 Fiat 500s fail 41.3% of first MOT tests, 16% more MOT fails than the average car its age and mileage, ranking 5 of 14 500 years (69,695 DVSA tests, 2022 to 2024).

What fails on a 2010 Fiat 500 MOT?

Most often suspension arm pin/bush excessively worn (4.23% of tests), parking brake efficiency below minimum (4.16% of tests), shock absorber serious fluid leak (3.34% of tests).

How many miles should a 2010 Fiat 500 have done?

At its MOT aged about 13, a typical 2010 Fiat 500 shows 72,076 miles. Much higher or lower is worth asking about.

What plate is a 2010 car?

A car first registered in 2010 carries a 59 plate (January–February 2010), or a 10 plate (March–August 2010), or a 60 plate (September–December 2010).

Check a 2010 Fiat 500 free

MOT history, mileage record, ULEZ, tax and recalls on any UK car, in seconds. No sign-up, no card.